More Information The Better!
What is included in the MyDipKit?
1 x 4 oz Aerosol can of primer
1 x 4 oz Aerosol can of base coat paint
1 x 4 oz Aerosol can of activator
1 x 4 oz Aerosol can of clear top coat
1 x pair of latex gloves
1 x mask
1 x 3"x4" scuffing pad
1 sq meter of film           (pattern depends on the kit ordered)
Details instructions for the dipping process
What you need to have in order to dip....

  • Dipping Container: The vessel or container needed for processing.
  • Heated water: You will need to fill your dipping container with heated water. You can use warm water straight from your sink. You do not need to add anything to the water. The water would be about the same temperature as you would use to wash your hands, not too hot nor too cold.
  • Eye protection
Choosing the right dipping container.
The container can be made of any desired material such as plastic, glass or metal. A square or rectangular container is the most desired configuration.The container should be of a size that when you lay your desired part to be processed in the center of the container, you should have two to three inches of space between the sides of the container. Also, the container should be deep enough that when you process your part it will be totally submersed below the water line. Your container can never be too deep, but it can be too shallow.
  Do It Yourself
Water Transfer
Imaging Kit