MyDipKit
Water Transfer Imaging Made Easy
What is Water Transfer Imaging?
Water transfer imaging is the process of applying decorative finished to 3D products. Any hard surface, non-porous and that can be safely submerged in water can be dipped. Basically if paint will stick to the surface of the part you can dip it! Some examples of suitable dipping materials are: plastic, glass, hardwoods, fiberglass, ceramics, and metal (metal objects will require you to use a self etching metal primer - which is not included in the MyDipKit)
How does the Water Transfer Imaging Process Work
Products are decorated using a pattern, which is printed onto a thin base of water-soluble film. The printed film is placed on the surface of the water and the base begins to dissolve. A patented activator chemical is sprayed over the film causing the ink to remain floating, in an oil-like state, on top of the water. Next the properly prepared part is immersed into into the printed pattern which is floating on the water and the upward pressure of the water causes the ink to wrap around and adhere to the item. After the entire item has been immersed it is removed from the water and rinsed. The part is then painted with a clear coat. Included in the kit is a link to a set of video instructions that walk you through all the steps in the process.
